Pinch pliers 2.5 l pump set

Pinch pliers 2.5 l oil extraction pump set

The capacity of vacuum oil extraction PL-2000 pumps is 2.5 liters.
It is adapted to low capacity oil changes.
It is the ideal choice to drain cars, motorbikes, scooters, mopeds, snow-bikes, karts, quads, mowers, yachts, small fishing boats, jet skis...
This oil extraction pump can also be used to eliminate pipe obstructions and empty aquariums.

The 5 liters collecting drum is designed to take used oil to the nearest waste collection site. This drum is approved for transporting used oil and is supplied with a pourer.

The 2-in-1 funnel is used to pour used oil from the vacuum pump into the collecting drum.

The oil filter pinch pair of pliers is used to perform the safe dismantling of the oil filter. It is particularly recommended for oil filters with diameters from 65 to 120 mm.

Using our oil extraction pump: quick and easy

Insert the extraction probe into the oil tank, to the bottom.
Start vacuum action by rapidly pumping out 5 to 10 times.
Oil is then automatically changed.
The tank of your pump is then filled in. You can control the level as the tank is semi-translucent and is graduated in liters.
Pour your used oil into a dedicated drum.

Using pinch pliers to remove oil filters

Once you have drained your vehicle, using a vacuum oil extraction pump, you have to change the oil filter.
Using your oil filter pinch pliers, remove the used oil filter.
Be careful as they can be some oil left inside the filter.
Fill the tank with new oil.
Prior to fitting the new oil filter, oil the rubber seal.
Firmly screw the oil filter by hand.
Never tighten the new filter again using the oil filter pinch pliers.

Technical features of a 2.5 litre oil extraction pump :

- Capacity : 2.5 liters

- Total assembled height : 44.5 cm

- Tank diameter : 18 cm

- Semi-translucent tank graduated in liters

- Extraction probe length : 110 cm

- Extraction probe diameters : 0.565 cm (5.65 mm)

- Extraction probe extension : 100 cm

 Technical features of a 5 litre collecting drum :

- Drum approved to transport used oil

- With a pourer

- Capacity : 5 liters

 Technical features of a 2-in-1 funnel:

- With a filter

- With a handle

- Base diameter : 16 cm

- Fitting diameter : 1 cm

- Black plastic

 Technical features of an oil filter pinch pair of pliers :

- Can handle oil filters with diameters from 65 to 120 mm.

In case you require larger capacities, please refer to our other sets of oil extraction pumps, including 6 liters, 6.5 liters, 4 liters and 14 liters pumps.
Vidange Facile (Easy-Draining) also proposes a large range of oil change accessories including gloves.