Strap wrench 14 L pump set

Strap wrench 14 l oil extraction pump set

The capacity of vacuum oil extraction PL-14 pro pumpsis 14 liters.

This pump has a large oil change capacity. It is both fast and reliable for frequent oil changes.

The 20 liter collecting drumis designed to take used oil to the nearest waste collection site. This drum is approved for transporting used oil and is supplied with a pourer.

The 2-in-1 funnel is used to pour used oil from the 14 liter vacuum pump into the collecting drum.

The oil filter strap wrenchis used to perform the safe dismantling of the oil filter. It is particularly recommended for oil filters with diameters from 65 to 120 mm.

Using our oil extraction pump: quick and easy

Insert the extraction probe into the oil tank, to the bottom.

Start vacuum action by rapidly pumping out 5 to 10 times.

Oil is then automatically changed.

The tank of your pump is then filled in. You can control the level as the tank is semi-translucent and is graduated in liters.

Pour your used oil into a dedicated drum.

Using a strap wrench to remove oil filters

Once you have drained your vehicle, using a vacuum oil extraction pump, you have to change the oil filter.

Using your oil filter strap wrench, remove the used oil filter.

Be careful as they can be some oil left inside the filter.

Fill the tank with new oil.

Prior to fitting the new oil filter, oil the rubber seal.

Firmly screw the oil filter by hand.

Never tighten the new filter again using the oil filter strap wrench.

This strap wrench can also handle pipes whose diameters range from 50 to 95 mm.

Technical features of a 14 liter oil extraction pump :

- Total assembled height : 65 cm

- Tank diameter : 21.2 cm

- Semi-translucent tank graduated in liters

- Supplied with 2 extraction probes and an extension

- Extraction probe length : 150 cm

- Extraction probe diameters : 0.570 cm and 0.664 cm

- Extraction probe extension : 150 cm

Technical features of a 20 litre collecting drum :

- Drum approved to transport used oil

- With a pourer

- Capacity : 20 liters

Technical features of a 2-in-1 funnel :

- With a filter

- With a handle

- Base diameter : 16 cm

- Fitting diameter : 1 cm

- Black plastic

Technical features of an oil filter strap wrench :

- Can handle oil filters with diameters from 50 to 95 mm.

In case you require larger capacities, please refer to our other sets of oil extraction pumps, including 2.5 liter, 6 liter, 6.5 liter and 4 liter pumps.

Vidange Facile (Easy-Draining) also proposes a large range of oil change accessories.